We use cookies to provide you with a better service. By continuing we’ll assume you’re on board with our cookie policy.

  01922 490049
({{mb.basket.itemCount}} Items) {{mb.basket.subTotal}}

Showing the latest {{mb.basket.miniBasketItems.length}} products added. View full basket

Total items: {{mb.basket.itemCount}}
Sub-total: {{mb.basket.subTotal}}

Certified Window and Door Solutions

ERA has a range of solutions whichever standard you wish to meet, from TS 003 chains and restrictors to TS 007 certified cylinders; we provide fully tested product ready solutions. 

 

Jump to:    TS 003 Solutions    TS007 Solutions 

TS 003: 2012

What is TS 003?

TS 003:2012 is a technical standard from the Door and Hardware Federation (DHF) that specifies test methods for a door opening restrictor.

The scope includes products that are designed to safely limit the initial opening of the door, whilst still permitting householders to have a conversation with a visitor before fully opening the door. A typical door chain or door bar restrictor would be products that utilise this test method. Egress must always be retained even if the product has a ‘locking’ feature.

The standard has two main parts:

  1. Door opening impacts (abuse mode) – product shall resist 200 door opening impacts when subjected to an opening force of 100N
  2. Door opening impacts (attack mode) and resulting door gap – product and fixings shall be subjected to 3 impacts, after which the door opening shall not exceed 25mm at the point of disengagement and 76mm in the ‘on guard’ position

The test assumes no tools are used and that any unwelcome caller will only be able to use hand/ arm strength and/or bodyweight to attempt to force an entry. Door limiting stays (designed to prevent the door opening beyond a certain angle e.g. 90 degrees are excluded, as are safety restrictors stays that form part of BS 8213-1:2004).  

How can ERA help?

As part of our certified solutions range, ERA has a choice of two heavy-duty TS 003 door security devices, that can be fitted to new or existing doors.

Designed to limit the initial opening of the door for safety and independently tested to ensure the door is protected against extreme and repeated force or abuse.

Available in the patented Fab&Fix Hardex finishes, the chain or restrictor will perfectly match other door furniture, for stylish, yet practical door security. 

Want to find out more?

Contact the ERA team 

ERA TS 003 Solutions

TS 003 Heavy Duty Door Chain:

  • Offers visible security and peace of mind
  • Fit to new or existing timber, solid core composite or PVCu doors
  • In abuse mode, the chain exceeds breaking forces of 100N
  • Available in the patented Fab&Fix finishes
More Info

TS 003 Heavy Duty Door Restrictor:

  • Designed to limit door opening before allowing entrance to visitors
  • Easily applied and released when the door is closed
  • Fitting to new or existing timber doors
  • In abuse mode, the door restrictor exceeds breaking forces of 100N
  • Available in the patented Fab&Fix finishes
More Info

TS 007-1:2014+ A2:2018

What is TS 007-1:2014?

TS 007-1:2014+ A2:2018 is a technical standard from the Door and Hardware Federation (DHF) that specifies enhanced security performance requirements for replacement cylinders and/ or associated hardware.  

Cylinders and security hardware are classified according to their security performance.

Cylinders may achieve one or three stars whilst security hardware may achieve two stars. The overall security performance of a combination of cylinder and associated hardware is the cumulative star rating of the two components.

To achieve compliance with this specification, the minimum requirement for the package shall be three stars.

How can ERA help?

As part of our certified solutions range, ERA has a choice of two maximum security TS 007 3 Star cylinders, that can be fitted to new or existing doors.

Choose a euro profile cylinder or an Invincible cylinder to provide maximum 3 Star security for protection against snapping, bumping, picking and drilling.  

ERA also have a TS 007 1 Star cylinder that can be used in conjunction with a 2 Star security handle to meet the required cumulative 3 Star rating. 

Want to find out more?

Contact the ERA team 

ERA TS 007 Solutions

TS 007 3 Star Euro Profile Door Cylinder:

  • £1000 Anti-Snap Guarantee
  • Patented secure cam design
  • Cylinder body is supplied with a sacrificial snap section
  • Certified British Standard 3* Kitemark
More Info

TS 007 3 Star Invincible Door Cylinder:

  • 5 times the strength of a conventional cylinder
  • Offers maximum protection against attack
  • Manufactured from solid brass 
  • Certified British Standard 3* Kitemark
More Info